Ford 2006 Mustang v.1 Uživatelský manuál

Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 15Entertainment Systems 19AM/FM stereo with CD 19AM/FM stereo with in-dash six

WARNING LIGHTS AND CHIMESBase instrument clusterOptional instrument clusterWarning lights and gauges can alert you to a vehicle condition that maybeco

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

Front passenger sensing systemThe front passenger sensing system is designed to meet the regulatoryrequirements of Federal Motor Vehicle Safety Standa

The front passenger sensing system is designed to disable (will notinflate) the front passenger’s frontal airbag when a rear facing infantseat, a forw

Even with Advanced Restraints Systems, children 12 and undershould be properly restrained in the back seat.After all occupants have adjusted their sea

• Objects hanging off the seat back• Objects stowed in the seatback map pocket (if equipped)• Objects placed on the occupant’s lap• Cargo interference

• Wait at least 2 minutes and verify that the airbag readiness light is nolonger illuminated• If the airbag readiness lamp remains illuminated, this m

How does the side airbag system work?The design and development of the side airbag system includedrecommended testing procedures that were developed b

Several air bag system components get hot after inflation. Do nottouch them after inflation.If the side airbag hasdeployed, the airbag willnot functio

Important child restraint precautionsYou are required by law to use safety restraints for children in the U.S.and Canada. If small children (generally

Child booster seatsChildren outgrow a typical convertible or toddler seat when they weigh40 lb. (18 kg) and are around 4 years of age. Although the la

Service Engine Soon: The ServiceEngine Soon indicator lightilluminates when the ignition is firstturned to the ON position to checkthe bulb. Solid ill

Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi

Children and booster seats vary widely in size and shape. Choose abooster that keeps the lap belt low and snug across the hips, never upacross the sto

Never use pillows, books, or towels to boost a child. They canslide around and increase the likelihood of injury or death in acollision.SAFETY SEATS F

tether anchors. For more information on top tether straps and anchors,refer to Attaching safety seats with tether straps in this chapter. Formore info

2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt isextracted and a c

Attaching child safety seats with tether strapsMost new forward-facing child safety seats include a tether strap whichgoes over the back of the seat a

For Coupe only:4. Open the tether anchor covers.5. Clip the tether strap to theanchor as shown.For Convertible only:The tether anchors on theconvertib

Note: The attachments for theconvertible boot located on the backof the head restraints are not tetheranchors.4. Access tether anchors locatedbehind t

5. Clip the tether strap to theanchor as shown.If the tether strap is clipped incorrectly, the child safety seatmay not be retained properly in the ev

Anti-lock brake system (ifequipped): If the ABS light staysilluminated or continues to flash, amalfunction has been detected, havethe system serviced

Your vehicle has LATCH anchors for child seat installation at the seatingpositions marked with the child seat symbol.The center of the rear seatis NOT

If you install a child seat with rigid LATCH attachments, do not tightenthe tether strap enough to lift the child seat off the vehicle seat cushionwhe

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o

Increasing the inflation pressure beyond this pressure will not increasethe tire’s load carrying capability.• kPa: Kilopascal, a metric unit of air pr

gauges may be inaccurate. Ford Motor Company recommends the use ofa digital or dial-type tire pressure gauge rather than a stick-type tirepressure gau

To check the pressure in your tire(s):1. Make sure the tires are cool, meaning they are not hot from drivingeven a mile.Note: If you have to drive a d

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

This begins with the letters “DOT” and indicates that the tire meets allfederal standards. The next two numbers or letters are the plant codedesignati

Never spin the tires in excess of the 35 mph (55 km/h) pointindicated on the speedometer.Highway hazardsNo matter how carefully you drive there’s alwa

Traction Control娂 active: Flasheswhen the Traction Control娂 isactive. If the light remains on amalfunction has been detected; havethe system serviced

• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/

11. Maximum Load: Indicates the maximum load in kilograms andpounds that can be carried by the tire. Refer to the Safety ComplianceCertification Label

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

SNOW TIRES AND CHAINSDriving too fast for conditions creates the possibility of loss ofvehicle control. Driving at very high speeds for extended perio

Base Curb Weight – is the weight of the vehicle including a full tank offuel and all standard equipment. It does not include passengers, cargo, oropti

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAW (Gross Axle Weight) – is the total weight placed on each axle(front and rear) – including vehicle curb weight and all payload.GAWR (Gross Axle Wei

Turn signal: Illuminates when theleft or right turn signal or thehazard lights are turned on. If theindicators stay on or flash faster, check for a bu

GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).

Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o

The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w

Do not exceed the GVWR or the GAWR specified on thecertification label.Towing trailers beyond the maximum recommended gross trailerweight exceeds the

Trailer lampsTrailer lamps are required on most towed vehicles. Make sure all runninglights, brake lights, turn signals and hazard lights are working.

• Vehicles with trailers should not be parked on a grade. If you mustpark on a grade, place wheel chocks under the trailer’s wheels.RECREATIONAL TOWIN

STARTINGPositions of the ignition1. OFF/LOCK, locks the steeringwheel, automatic transmissiongearshift lever and allows keyremoval.Note: The ignition

Do not start your vehicle in a closed garage or in other enclosedareas. Exhaust fumes can be toxic. Always open the garage doorbefore you start the en

• Make sure the gearshift is in P(Park).• Make sure the parking brake isset.If starting a vehicle with a manual transmission:• Make sure the parking b

3. Turn the key to 3 (ON) withoutturning the key to 4 (START).Some warning lights will briefly illuminate. See Warning lights andchimes in the Instrum

GAUGESBase instrument cluster gaugesOptional instrument cluster gaugesRefer to Message Center (if equipped) in the Driver Controls chapterto select on

Important ventilating informationIf the engine is idling while the vehicle is stopped for a long period oftime, open the windows at least one inch (2.

ABS warning lampThe ABS lamp in the instrumentcluster momentarily illuminateswhen the ignition is turned on. Ifthe light does not illuminate duringsta

Always set the parking brake fully and make sure that thegearshift is securely latched in P (Park) (automatictransmission) or in 1 (First) (manual tra

The Traction Control娂 switch,located above the radio, illuminateswhen the system is off. The TractionControl娂 system will automaticallyturn on every t

If the steering wanders or pulls, check for:• an improperly inflated tire• uneven tire wear• loose or worn suspension components• loose or worn steeri

3. Insert the ignition key and push itstraight down to release theinterlock.4. Apply the parking brake, then shift to N (Neutral).5. Start the vehicle

Understanding the gearshift positions of the 5–speed automatictransmissionThis vehicle is equipped with an adaptive Transmission Shift Strategy.Adapti

To put your vehicle in P (Park):• Come to a complete stop• Move the gearshift lever and securely latch it in P (Park)Always set the parking brake full

• To return to Overdrive mode, press the transmission control switch.The O/D OFF lamp will not be illuminated.• Overdrive mode is automatically return

Do not rock the vehicle if the engine is not at normal operatingtemperature or damage to the transmission may occur.Do not rock the vehicle for more t

Speedometer: Indicates the current vehicle speed.• Base instrument cluster• Optional instrument clusterEngine coolant temperaturegauge: Indicates engi

Recommended shift speedsDo not downshift into 1 (First) when your vehicle is movingfaster than 15 mph (24 km/h). This will damage the clutch.Upshift a

DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive th

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

• towing of your disabled vehicle• emergency travel expense reimbursement• travel planning benefitsUsing roadside assistanceComplete the roadside assi

Note: With extended use, the flasher may run down your battery.FUEL PUMP SHUT-OFF SWITCHFUELRESETThis device stops the electric fuel pump from sending

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey — — —3A Violet V

The fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description1 Mini relay Accessory delay #12 — Not used3

Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description17 10A Restraint Control Module (RCM),Passenger Occupant DetectionSystem (P

The high-current fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription1 — Not used2 30A* Climate control blower

Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription13 40A* Convertible top14 30A* Seat15 — Not used16 30A* Front amplifier (Shaker 500ra

• Optional instrument clusterRefer to Message Center in theDriver Controls chapter on how toswitch the display from Metric toEnglish.Trip odometer: Re

Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription46 25A** Horn47 15A** Engine #148 Diode A/C clutch49 15A** A/C clutch50 15A** High be

CHANGING THE TIRESIf you get a flat tire while driving:• do not brake heavily.• gradually decrease the vehicle’s speed.• hold the steering wheel firml

• Tow a trailer• Use snow chains on the end of the vehicle with the dissimilar sparetire• Use more than one dissimilar spare tire at a time• Use comme

When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to:• Towing a trailer• Driving vehicles equipped with a

1. Block both the front and rear ofthe wheel diagonally opposite theflat tire. For example, if the leftfront tire is flat, block the right rearwheel.2

4. Put the jack in the jack notchnext to the tire you are changing.Turn the jack handle clockwise untilthe wheel is completely off theground.Never use

WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque at 500 miles (800 km)after any wheel disturbance (tire rotation, cha

1. Use only a 12–volt supply to start your vehicle.2. Do not disconnect the battery of the disabled vehicle as this coulddamage the vehicle’s electric

2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat

2. Start the engine of the disabled vehicle.3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disc

Battery voltage gauge (ifequipped): Indicates the batteryvoltage when the ignition is in theON position. If the pointer movesand stays outside the nor

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling

Ford Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf you own a Lincoln vehicle and are away f

In the United States, a warranty dispute must be submitted to theDispute Settlement Board before taking action under the Magnuson-MossWarranty Act, or

achieving satisfaction by following the three-step procedure outlined onthe front page of the Warranty Guide. However, if your warranty concernhas not

The CAMVAP program is a straight-forward and relatively speedyalternative to resolve a disagreement when all other efforts to produce asettlement have

If you cannot find unleaded fuel or can only get fuel with an anti-knockindex lower than is recommended for your vehicle, contact a regionaloffice or

Or call:For a free publication catalog, order toll free: 1-800-782-4356Monday-Friday 8:00 a.m. - 6:00 p.m. ESTHelm, Incorporated can also be reached b

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

AUDIO SYSTEMSAM/FM stereo/ single CD sound system (if equipped)Accessory delay: Your vehicle is equipped with accessory delay. Withthis feature, the w

• Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips.• Always

• 4.0L SOHC V6 engine• 4.6L 3V SOHC V8 engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damag

PLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your authorized dealer.• For r

INSTRUMENT PANEL AND CLUSTER LENSClean the instrument panel with a damp cloth, then with a clean, drycloth, or use Motorcraft Dash & Vinyl Cleaner

• To clean, use a soft cloth with Motorcraft Deluxe Leather and VinylCleaner (ZC-11–A). Dry the area with a soft cloth.• To help maintain its resilien

Motorcraft One Step Wash and Wax Concentrate (ZC-6-A)Motorcraft Paint Sealant (ZC-45)Motorcraft Premium Car Wash Concentrate (U.S. only) (ZC-17-B)Moto

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide sc

Working with the engine on• Automatic transmission:1. Set the parking brake and shift to P (Park).2. Block the wheels.• Manual transmission:1. Set the

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT4.0L SOHC V6 engine1. Battery2. Engine oil filler cap3. Engine oil dipstick4. Brake fluid reservoir5.

4.6L 3V SOHC V8 engine1. Battery2. Engine oil filler cap3. Engine oil dipstick4. Brake fluid reservoir5. Air filter assembly6. Power steering fluid re

Seating and Safety Restraints 76Seating 76Safety restraints 82Airbags 97Child restraints 107Tires, Wheels and Loading 122Tire Information 122Vehicle l

Balance: Press to adjust the audio between the left and right speakers.Use/ / SEEK .Fade: Press to adjust the audio between the front and rear speaker

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

CHANGING THE WIPER BLADES1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Push the lockpin manually to releas

• 4.0L V6 engine• 4.6L 3V V8 engine6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.• If the oil level is between the lowe

• 4.0L V6 engine• 4.6L 3V SOHC V8 engine• Oil levels above the upper hole may cause engine damage. Some oilmust be removed from the engine by an autho

2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler cap

4.0L V6 EngineLook for this certificationtrademark.Use SAE 5W-30 engine oil.Only use oils “Certified For Gasoline Engines” by the AmericanPetroleum In

BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.How

When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a

will not affect function or durability of the transmission. Over time theadaptive learning process will fully update transmission operation to itsopti

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

8. Comp (Compression): In CDmode, brings soft and loud CDpassages together for a moreconsistent listening level.9. Repeat: Press to repeat thecurrent

Do not put engine coolant in the windshield washer fluidcontainer. If sprayed on the windshield, engine coolant couldmake it difficult to see through

To reduce the risk of personal injury, make sure the engine iscool before unscrewing the coolant pressure relief cap. Thecooling system is under press

Used engine coolant should be disposed of in an appropriatemanner. Follow your community’s regulations and standards for recyclingand disposing of aut

What you should know about fail-safe cooling (4.6L V8 engineonly)If the engine coolant supply is depleted, this feature allows the vehicle tobe driven

4. Check the coolant level and replenish if low.Never remove the coolant reservoir cap while the engine isrunning or hot.5. Restart the engine and tak

Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforerefueling your vehicle.• Al

RefuelingFuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others:• Read and follow all the instr

If you must replace the fuel filler cap, replace it with a fuel fillercap that is designed for your vehicle. The customer warranty maybe void for any

Octane recommendationsYour vehicle is designed to use“Regular” unleaded gasoline withpump (R+M)/2 octane rating of 87.We do not recommend the use ofga

• The indicator may come on. For more information on the “CheckEngine” or the “Service engine soon” indicator, refer to Warninglights and chimes in th

18. CD eject: Press to eject a CD.19. CD slot: Insert a CD label sideup.SHAKER 500 — Audiophile In-Dash Six CD/MP3 Sound System(if equipped)2006 05+ M

• Use the same filling rate setting (low — medium — high) each timethe tank is filled.• Allow no more than two automatic click-offs when filling.• Alw

• Idling for long periods of time (greater than one minute) may wastefuel.• Anticipate stopping; slowing down may eliminate the need to stop.• Sudden

• Using fuel blended with alcohol may lower fuel economy.• Fuel economy may decrease with lower temperatures during the first8–10 miles (12–16 km) of

Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,

These temporary malfunctions can be corrected by filling the fuel tankwith good quality fuel and/or properly tightening the fuel cap. After threedrivi

POWER STEERING FLUIDCheck the power steering fluid.Refer to the scheduled maintenanceguide for the service intervalschedules. If adding fluid isnecess

TRANSMISSION FLUIDChecking automatic transmission fluidThe 5R55S transmission does not have a transmission fluid dipstick.Refer to your scheduled main

Checking and adding manual transmission fluid (if equipped)1. Clean the filler plug.2. Remove the filler plug and inspect the fluid level.3. Note: The

• Fill level for V6• Fill level for V84. Add enough fluid through the filler opening to bring the fluid up tothe recommended levels.5. Install and tig

For PCV valve replacement, see your authorized dealer. Refer toscheduled maintenance information for the appropriate intervals forchanging the PCV val

SHAKER 1000 — Audiophile In-dash Six CD/MP3 Sound System(if equipped)Accessory delay: Your vehicle is equipped with accessory delay. Withthis feature,

REFILL CAPACITIESFluid Ford PartNameApplication CapacityBrake fluid and(clutch fluid ifequipped)Motorcraft HighPerformanceDOT 3 MotorVehicle BrakeFlui

Fluid Ford PartNameApplication CapacityAutomaticTransmissionfluid3MotorcraftMERCON威VATFAll 11.9 quarts(11.2L)4ManualTransmissionfluid3MotorcraftMERCON

LUBRICANT SPECIFICATIONSItem Ford partnameFord partnumberFordspecificationBrake fluid and(clutch fluid ifequipped)Motorcraft HighPerformanceDOT 3 Moto

Item Ford partnameFord partnumberFordspecificationPower steeringfluidMotorcraftMERCON威 ATFXT-2-QDX MERCON威Rear AxleLubricantMotorcraft SAE75W-140Synth

ENGINE DATAEngine 4.0L V6 engine 4.6L V8 engineCubic inches 245 281Required fuel 87 octane 87 octaneFiring order 1-4-2-5-3-6 1-3-7-2-6-5-4-8Ignition s

VEHICLE DIMENSIONSVehicle dimensions Base - inches (mm) GT - inches (mm)(1) Vehicle height 55.4 (1408) 55.4 (1408)(2) Tread Width-Front62.8 (1594) 62.

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

Vehicle identification number (VIN)The vehicle identification number isattached to a metal tag and islocated on the driver sideinstrument panel.Please

TRANSMISSION/TRANSAXLE CODE DESIGNATIONSYou can find atransmission/transaxle code on theSafety Compliance CertificationLabel. The following table tell

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local authorized Ford

3. Menu: Press to toggle throughthe following modes:Setting the clock: Press until SELECT HOUR or SELECT MINS isdisplayed. Press/ / SEEK to adjust the

LifestyleBike racksCargo organization and managementPeace of mindFirst aid and highway safety kitsFull vehicle coversLocking gas capKeyless entry keyp

AAccessory delay ...45Air cleaner filter ...228Airbag supplemental restraintsystem ...

Clutchfluid ...225operation while driving ...159recommended shift speeds ...160Console ...

calculating fueleconomy ...58, 219cap ...216capacity ...

headlamps, flash to pass ...33instrument panel, dimming ...34interior lamps ...36–37replacing bulbs ...36–3

Safety seats for children ...112Safety ComplianceCertification Label ...236Seat belts (see Safetyrestraints) ...

Windshield washer fluid andwiperschecking and adding fluid...200operation ...42replacing wiper blades ...201

247

248

Occupancy mode: Use / / SEEK select and optimizesound for ALL SEATS, DRIVERS SEAT or REAR SEATS.Speed sensitive volume: Radio volume changes automatic

8. FOLDER: Press to access nextfolder on MP3 discs, if folders areavailable.9. FOLDER: press to access theprevious folder on MP3 discs, iffolders are

18. LOAD: Press to begin the CDload sequence. When the radioprompts to select a slot, use thepresets to select the desired slot toload the CD. If the

GENERAL AUDIO INFORMATIONRadio frequencies:AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio

CD units are designed to play commercially pressed 4.75 in (12cm) audio compact discs only. Due to technical incompatibility,certain recordable and re

Maintenance and Specifications 196Engine compartment 198Engine oil 201Battery 206Engine Coolant 208Fuel information 214Part numbers 228Refill capaciti

MANUAL HEATING AND AIR CONDITIONING SYSTEM1. Temperature selection: Controls the temperature of the airflow inthe vehicle.2. Mode selections: Controls

6. Fan speed adjustment: Controls the volume of air circulated in thevehicle.Operating tips• To reduce fog build up on the windshield during humid wea

REAR WINDOW DEFROSTER (R )Ensure that the ignition is in the 3 (ON) position. Press the control toclear the rear window of thin ice and fog. The LED w

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.High b

• the headlamp control is in the OFF or parking lamp position and• the parking brake must be disengaged.Always remember to turn on your headlamps at d

• (1) 8 feet (2.4 meters)• (2) Center height of lamp toground• (3) 25 feet (7.6 meters)• (4) Horizontal reference line2. Measure the height from thece

TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.The flash rate of the turn signal will speed

Using the right bulbsReplacement bulbs are specified in the chart below. Headlamp bulbs mustbe marked with an authorized “D.O.T.” for North America an

Handle a halogen headlampbulb carefully and keep outof children’s reach. Grasp the bulbonly by its plastic base and do nottouch the glass. The oil fro

2. Remove the sight shield byloosening the six fasteners with aflat head screwdriver.3. Remove the two underhood boltsattaching the bumper cover next

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Replacing backup bulbsThe backup lamp is located in the tail lamp assembly. Follow the samesteps to replace either bulb.1. Make sure headlamp switch i

Replacing high-mount brake lamp bulbs1. Make sure the headlamp switch is in the OFF position and then openthe trunk.2. Inside trunk, pull the trim pan

MULTI-FUNCTION LEVERWindshield wiper: For intermittentoperation, move control up oneposition.Adjust the rotary control to thedesired speed setting.For

TILT STEERING WHEEL (IF EQUIPPED)To adjust the steering wheel:1. Push the lever down to unlockthe steering column. While the leveris in the down posit

Cigarette/Cigar lighter (if equipped)Do not plug optional electrical accessories into the cigarette lightersocket.Do not hold the lighter in with your

Express down (One Touch Down, Front windows only)Allows the driver and passenger’swindow to open fully withoutholding the control down. Push theswitch

Bounce Back Override (Front windows only)To override Bounce Back, within 2 seconds after reaching Bounce Backposition, if the switch is moved from the

EXTERIOR MIRRORSPower side view mirrors (if equipped)To adjust your mirrors:1. Rotate the control clockwise toadjust the right mirror and rotatethe co

• If the vehicle speed decreases more than 10 mph (16 km/h) belowyour set speed on an uphill, your speed control will disengage.• If the vehicle speed

• Depress the brake pedal until thedesired vehicle speed is reached,press the SET + control.Turning off speed controlThere are two ways to turn off th

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

The latch handles must be pulleddownwards fully to allow thelatch to fully rotate into theopen position3. Unclamp the top from thewindshield header by

Installation of the boot (if equipped)Be sure the boot is secure on the vehicle before driving.1. Install the boot on the vehicle by hooking the boot

Storing the boot1. Position the boot right-side up and fold each side of the boot inward.2. Turn the boot upside down and fold the left side of the bo

To raise the convertible top:1. Bring the vehicle to a complete stop. Key must be in the ON position.It is recommended that the vehicle’s engine is ru

MESSAGE CENTER (IF EQUIPPED)With the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle info

System checkSelecting this function from theSETUP menu causes the messagecenter to cycle through each of thesystems being monitored. For eachof the mo

2. Pressing RESET will scroll through the following selectable colors:Green BluePurple WhiteOrange RedMyColor Adjust (to define MyColor)Adjusting MyCo

Language1. Select this function from theSETUP menu for the currentlanguage to be displayed.2. Pressing the RESET controlcycles the message center thro

Single mode displayDual mode displayThe DTE function will display LOW FUEL LEVEL and sound a tone forone second when you have approximately 50 miles (

Instantaneous fuel economySelect this function from the INFOmenu to display your instantaneousfuel economy. This will display yourfuel economy as a Ba

Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.Please read the section Supplemental restraint

System warningsSystem warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems.In the event of a multiple warning si

when the engine is idling at a low speed, turn off as many of theelectrical loads as soon as possible. If the warning stays on or comes onwhen the eng

POSITIVE RETENTION FLOOR MAT (IF EQUIPPED)Only use one set of floor mats at any given time.Position the floor mat so that theeyelet is over the pointe

KEYSOne key operates all the locks and starts the vehicle. Always carry aspare key with you in case of an emergency.Your keys are programmed to your v

Autolock (if equipped)On vehicles equipped with an automatic transmission, this featureautomatically locks all vehicle doors when:• all doors are clos

• The driver’s door is unlocked when the key is inserted in the driverdoor key cylinder and turned to the unlock position. The driver’s dooris locked

To open the luggage compartmentdoor (lid) from within the luggagecompartment, pull the illuminated“T” shaped handle and push up onthe trunk lid. The h

REMOTE ENTRY SYSTEMThis device complies with part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to the following two con

Locking the doors1. Press and release to lock all the doors. Note: The interior lampswill turn off (unless the dome lamp control is in the full-up pos

To replace the battery:1. Twist a thin coin between the twohalves of the remote entrytransmitter near the key ring. DONOT TAKE THE RUBBER COVERAND CIR

To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access e

To reprogram the remote entrytransmitters:1. Ensure the vehicle iselectronically unlocked.2. Put the key in the ignition.3. Cycle eight times rapidly

open, and in 30 minutes if the dome lamp control is left on and theignition has been turned to the 1 (OFF/LOCK) position. The batterysaver will also s

Automatic armingThe vehicle is armed immediatelyafter switching the ignition to the 1(OFF/LOCK) position.The theft indicator will flash everytwo secon

Tips:• A maximum of eight keys can be coded to your vehicle.• Only use Securilock娂 keys.• You must have two previously programmed coded keys (keys tha

To program additional new unprogrammed key(s), repeat this procedurefrom Step 1 for each additional key.ACTIVE ANTI-THEFT SYSTEM (IF EQUIPPED)The acti

Arming the systemWhen armed, the active anti-theft system is designed to notify you of anunauthorized entry. When unauthorized entry or towing occurs,

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

Lift the head restraint to raise theheight.To lower the head restraint, pressthe button located on the driver’sside post.Adjusting the front manual se

Pull lever up to adjust the angle ofthe seatback.Four-way seat adjust (driver side only)Pump the handle upwards to raisethe cushion and pump downward

Do not pile cargo higher than the seatbacks to avoid injuringpeople in a collision or sudden stop.Always drive and ride with your seatback upright and

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Move the switch in the direction ofthe arrows to raise or lower thefront portion of the seat cushion.Move the switch in the direction ofthe arrows to

Use the recliner handle to returnthe seatback to the desired position.REAR SEATS2nd seat/split-folding rear seatOne or both rear seatbacks (coupe only

SAFETY RESTRAINTSPersonal Safety System姟The Personal Safety System娂 provides an improved overall level offrontal crash protection to front seat occupa

Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ

The front passenger sensing system can automatically turn off thepassenger front airbag. The system is designed to help protect small(child size) occu

The Restraints Control Module (RCM) monitors its own internal circuitsand the circuits for the airbag supplemental restraints, crash sensor(s),safety

In a rollover crash, an unbelted person is significantly more likelyto die than a person wearing a safety belt.Each seating position in your vehicle h

The belt guide is secured to the sideshield by fastening the magnet onthe guide strap to the magnet onthe side shield.1. Insert the belt tongue into t

Energy Management Feature• This vehicle has a safety belt system with an energy managementfeature at the front seating positions to help further reduc

This mode should be used any time a child safety seat is installed in apassenger front or outboard rear seating position. Children 12 years oldand und

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

After any vehicle collision, the front passenger and rear outboardseat belt systems must be checked by an authorized dealer toverify that the “automat

Use only extensions manufactured by the same supplier as the safetybelt. Manufacturer identification is located at the end of the webbing onthe label.

Conditions of operationIf... Then...The driver’s or frontpassenger’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition..

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

The driver and front passenger BeltMinder威 features can bedeactivated/activated by performing the following procedure:Before following the procedure,

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and right

Never place your arm over the airbag module as a deployingairbag can result in serious arm fractures or other injuries.To properly position yourself a

Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear