Ford 2009 Expedition v.1 Uživatelský manuál

Introduction 4Instrument Cluster 12Warning lights and chimes 12Gauges 17Entertainment Systems 20How to get going 20AM/FM stereo with CD 24AM/FM stereo

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Second row map lamps (if equipped)The second row map lamps arelocated in the headliner above thesecond row seats.The second row map lamp lightswhen:•

BULB REPLACEMENTHeadlamp condensationExterior lamps are vented to accommodate normal changes in pressure.Condensation can be a natural by-product of t

Function Number of bulbs Trade numberTurn/tail/brake/sidemarker lamps 2 3157K or 4157KBackup lamp 2 921Approach/mirror turn signallamps (if equipped)2

5. Disconnect the electricalconnector.6. Remove the bulb by turning itcounterclockwise and then pulling itstraight out.WARNING: Handle a halogen headl

5. Rotate the bulb socketcounterclockwise and remove fromthe lamp assembly.6. Carefully pull the bulb out of thesocket and push in the new bulb.7. Ins

Replacing the high-mount brakelampTo change the high-mountbrakelamp bulbs:1. Remove the two screws holdingthe lamp assembly in place.2. Pull the lamp

Replacing license plate lamp bulbThe license plate bulbs are located in the license plate housing assemblyon the liftgate. To change the license plate

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

Windshield wiper rainlamp feature (if equipped with Autolamp)When the windshield wipers are turned on during daylight, and theheadlamp control is in t

ILLUMINATED VISOR MIRROR (IF EQUIPPED)Lift the mirror cover to turn on thevisor mirror lamp.Slide on rod feature (ifequipped)Rotate the visor towards

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

WARNING: Do not use the conversation mirror to viewrearward traffic, do not allow rear passengers to distract youfrom the driving task, and make sure

CENTER CONSOLE (IF EQUIPPED)Your vehicle may be equipped with a variety of console features. Theseinclude:1. Cupholders2. Utility compartment, coin ho

To have full capacity usage of your power point, the engine is required tobe running to avoid unintentional discharge of the battery. To preventthe ba

Not equipped with rear climatecontrolCigar/Cigarette lighter (if equipped)Do not plug optional electrical accessories into the cigarette lightersocket

Press and pull the window switchesto open and close windows.• Push down (to the first detent)and hold the switch to open.• Pull up (to the first deten

Bounce-Back (Driver’s window only)When an obstacle has been detected in the window opening as thewindow is moving upward, the window will automaticall

Automatic dimming interior rear view mirrorYour vehicle is equipped with an interior rear view mirror which has anauto-dimming function. The electroni

EXTERIOR MIRRORSPower side view mirrorsThe ignition can be in any position to adjust the power side view mirrors.To adjust your mirrors:1. Rotate the

Note: 10 or more switch activations within one minute, or repeatedfolding/unfolding of the mirrors while holding the switch rearward duringfull travel

Signal indicator mirrors (if equipped)When the turn signal is activated,the lower portion of the mirrorhousing will blink.POWER ADJUSTABLE FOOT PEDALS

WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa

POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED)Deployable running boards (DRB) automatically move when the doorsare opened to assist entering and exitin

position <OUT> and flush the system (in particular the front and rearhinge arms) with a high-pressure car wash wand.Note: Do not use the running

3. Press the SET + control andrelease it.4. Take your foot off the acceleratorpedal.5. The indicator lighton theinstrument cluster will turn on.Note:•

Increasing speed while using speed controlThere are two ways to set a higherspeed:• Press and hold the SET + controluntil you get to the desiredspeed,

• Press the speed control OFFcontrol.Note: When you turn off the speedcontrol or the ignition, your speedcontrol set speed memory is erased.STEERING W

In DVD mode (if equipped):• Refer to the Family entertainment DVD system in theEntertainment Systems chapter.In any mode:• Press VOL + or − to adjustv

For further information on the SYNC system, refer to the SYNCsupplement.Navigation system/SYNC handsfree control features (ifequipped)Press VOICE brie

Bounce-back: When an obstacle has been detected in the moon roofopening as the moon roof is closing, the moon roof will automaticallyopen and stop at

Retain the original transmitter for use in other vehicles as well as forfuture programming procedures (i.e. new HomeLink威 equipped vehiclepurchase). I

5. Firmly press and release the “learn” or “smart” button. (The name andcolor of the button may vary by manufacturer.)Note: There are 30 seconds in wh

WARNING: Under engine misfire conditions, excessive exhausttemperatures could damage the catalytic converter, the fuelsystem, interior floor coverings

Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet

STANDARD MESSAGE CENTER (IF EQUIPPED)With the ignition in the on position,the message center, located on yourinstrument cluster, displaysimportant veh

Distance to empty (DTE)Selecting this function from theINFO MENU estimatesapproximately how far you can drivewith the fuel remaining in your tankunder

Outside air temperature (OAT)The outside air temperature isshown together with the compassheading in the bottom row of themessage center display.Compa

5. Press and hold the RESET stem for approximately two seconds toenter the compass zone adjustment mode.6. Press and release the RESET stem until the

Setup menuThis menu allows the user, via the RESET stem located in theinstrument cluster, to interface and control the information displayed inthe mes

Pressing the RESET stem cycles the message center through each of thesystems being monitored. If the RESET stem is not pressed, the displaywill automa

3. Press the RESET stem for the next SETUP MENU item or wait formore than four seconds to return to the INFO MENU (“HOLD RESETFOR SETUP MENU” will app

1. To disable/enable the autounlockfeature, select this function from theSETUP MENU.2. Press and hold the RESET stemfor two seconds to turn theautounl

• They reappear if the condition clears then reoccurs within the sameignition on-off cycle.This acts as a reminder that these warning conditions still

Airbag readiness: If this light failsto illuminate when the ignition isturned to on, continues to flash orremains on, have the systemserviced immediat

operating electrical accessories when the engine is idling at a low speed,turn off as many of the electrical loads as soon as possible. If thewarning

XXX MILES TO E FUEL LEVEL LOW — Displayed as an earlyreminder of a low fuel condition.WASHER FLUID LEVEL LOW — Indicates the washer fluid reservoiris

• Average Fuel Economy (AFE)• Instantaneous Fuel Economy• Trip Elapsed Drive Time• Blank ScreenOdometer/Trip odometerRefer to Gauges in the Instrument

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in miles/gallon orliters/100 km.If you calculate

2. Press and release RESET to pause the timer.3. Press and hold RESET for two seconds in order to reset the timer.Blank screenPress the RESET once to

The sequence of the system check report and how it appears in themessage center is as follows:1. OIL LIFE2. CHARGING SYSTEM3. WASHER FLUID LEVEL4. DOO

Units (English/Metric)1. Select this function from theSETUP menu for the current unitsto be displayed.2. Press the RESET control tochange from English

AutolockThis feature automatically locks all vehicle doors when the vehicle isshifted into any gear, putting the vehicle in motion.1. To disable/enabl

Power Liftgate (if equipped)This feature allows users to open/close the rear liftgate at the touch of abutton.1. To disable/enable the powerliftgate f

Compass zone/calibration adjustment1. Determine your magnetic zone byreferring to the zone map.2. Turn ignition to the on position.3. Start the engine

Low tire pressure warning(if equipped): Illuminates whenyour tire pressure is low. If the lightremains on at start up or whiledriving, the tire pressu

9. Press the RESET control to startthe compass calibration function.10. Slowly drive the vehicle in acircle (less than 3 mph [5 km/h])until the CIRCLE

System warningsSystem warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems.In the event of a multiple warning si

Warning display StatusBrake fluid level low Warning can be reset. Will NOT returnif reset and warning is cleared and setagain within the same ignition

REAR RIGHT DOOR AJAR — Displayed when the rear right door isnot completely closed.LIFTGATE / GLASS AJAR — Displayed when the liftgate or liftgateglass

WASHER FLUID LEVEL LOW — Indicates the washer fluid reservoiris less than one quarter full. Check the washer fluid level. Refer toWindshield washer fl

POSITIVE RETENTION FLOOR MAT (IF EQUIPPED)WARNING: Do not install additional floor mats on top of thefactory installed floor mats as they may interfer

The liftgate will only operate with the vehicle in P (Park). The chime willbeep once if conditions are not correct to start an operation. Theseconditi

To open the liftgate with the remote entry transmitter:Refer to Remote entry system in the Locks and Security chapter.To open the liftgate with outsid

2. Open and close the liftgate as you would a standard liftgate.Note: In case of operation in extreme cold -40°F (-40°C), or on extremeinclines, manua

WARNING: Make sure the liftgate is closed to prevent exhaustfumes from being drawn into the vehicle. If you must drive withthe liftgate open, keep the

Speed control: Illuminates whenthe speed control is activated. Turnsoff when the speed control systemis deactivated.Four wheel drive low (RTT)(if equi

WARNING: Make sure the liftgate is closed to prevent exhaustfumes from being drawn into the vehicle. If you must drive withthe liftgate open, keep the

To move the shelf to the dividerposition, pull up and pivot the shelfover the channels on the side trimpanels and snap vertically in place.WARNING: Do

To adjust the position of thecross-bar (if equipped):1. Loosen the thumbwheel at bothends of the cross-bar (bothcross-bars are adjustable).2. Slide th

KEYSYour vehicle is equipped with twoIntegrated Keyhead Transmitters(IKTs). The IKT functions as both aprogrammed ignition key thatoperates all the lo

Recommended handling of the Integrated Keyhead Transmitter(IKT)To avoid inadvertently activating the remote entry functions of yourvehicle, it is reco

POWER DOOR LOCKSPress control to unlock all doors.Press control to lock all doors.Smart locksThis feature helps to prevent you from locking yourself o

The autolock feature repeats when:• any door is opened then closed while the ignition is in the on positionand the vehicle speed is 9 mph (15 km/h) or

Keyless entry keypad procedure1. Turn the ignition to the off position.2. Close all doors, the liftgate and liftgate window.3. Enter 5–digit entry cod

Power door lock switch autounlock enable/disable procedureBefore starting, ensure the ignition is in the off position and all vehicledoors are closed.

Message center procedureFor information on activating/deactivating the autounlock feature usingthe vehicle’s message center, refer to Message center i

Key-in-ignition warning chime (if equipped): Sounds when the keyis left in the ignition in the off or accessory position and the driver’s dooris opene

The typical operating range for your IKT is approximately 33 feet(10 meters). A decrease in operating range could be caused by:• weather conditions,•

The inside lights will not turn off if:• they have been turned on using the dimmer control or• any door is open.The battery saver feature will turn of

Car finderPresstwice within three seconds. The horn will chirp and the turnlamps will flash. It is recommended that this method be used to locateyour

Deactivating the memory featureTo deactivate this feature:1. Press and hold either the 1 or 2 control on the driver’s seat for fiveseconds. (A tone wi

Note: Replacement of the battery will not cause the IKT to becomedeprogrammed from your vehicle. The IKT should operate normally afterbattery replacem

The lamps will automatically turn off:• if the ignition switch is turned to the on position, or• thecontrol is pressed, or• after 25 seconds of illumi

The lights will turn off if all the doors remain closed and• 25 seconds elapse, or• the key is inserted in the ignition.Battery saverThe battery saver

4. Three unique personal entry codes can be stored:• Pressing 1 • 2 assigns driver 1 settings.• Pressing 3 • 4 assigns driver 2 settings.• Pressing 5

To open the liftglass, press the 5 • 6 after entering the factory set5-digit code or your personal code.SECURILOCK™ PASSIVE ANTI-THEFT SYSTEMSecuriLoc

Anti-theft indicatorThe anti-theft indicator is located in the instrument panel cluster.• When the ignition is in the offposition, the indicator will

Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature, the needle will be inthe normal range (between “

• A second key on the same key ring as the coded keyIf any of these items are present, you need to keep these objects fromtouching the coded key while

Please read and understand theentire procedure before you begin.1. Insert the first previouslyprogrammed coded key into theignition.2. Turn the igniti

PERIMETER ALARM SYSTEM (IF EQUIPPED)The perimeter anti-theft system will help protect your vehicle fromunauthorized entry.If there is any potential pe

The turn signal lamps will flash once when all doors, the hood and theliftgate are closed indicating the vehicle is locked and entering the20 second c

SEATINGAdjustable head restraintsYour vehicle is equipped with front row outboard head restraints that arevertically adjustable.WARNING: To minimize t

3. Lower the head restraint bypressing and holding the guidesleeve adjust/release button andpushing down on the head restraint.Properly adjust the hea

2. Simultaneously press and holdboth the adjust/release button andthe unlock/remove button, then pullup on the head restraint.To reinstall the adjusta

Lift handle to move seat forward orbackward.Manual seat recliner (if equipped)WARNING: Always drive and ride with your seatback uprightand the lap bel

Using the armrest (if equipped)Push the release control to movethe armrest up or down.Using the manual lumbar support (if equipped)The lumbar support

Using the power lumbar support (if equipped)The power lumbar control is located on the outboard side of the seat.Press the forward side of the control

Tachometer: Indicates the enginespeed in revolutions per minute.Driving with your tachometerpointer continuously at the top ofthe scale may damage the

Move the switch in the direction ofthe arrows to raise or lower the rearportion of the seat cushion.Press the switch in the direction ofthe arrows to

Memory seat/power mirrors/adjustable pedals (if equipped)This system allows automaticpositioning of the driver seat,outside rearview mirrors andadjust

Heated seatsWARNING: Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes, spinal cordinjury, medication,

Climate controlled seats air filter replacement (if equipped)The climate controlled seat system includes air filters that must bereplaced periodically

To install a filter:• First, position the filter in itshousing making sure that the farforward end is all the way up inthe housing. Then push in on th

2. Locate handle on the side of theseat cushion by the door.3. Pull up on the handle and pushthe seatback forward toward thefront of the vehicle.To re

Placing the 2nd row outboard 40% seats in cargo modeWARNING: Use caution when folding the seatback to the flatback position as the system will move fo

Returning to the upright position from full lowered load floorpositionThe seatback cannot be returned to the upright position until the seat isreturne

To return the seat to a seating position:1. Push the seat down and latch tothe floor with a moderate amount ofeffort and speed.2. Make sure the seat i

Exiting the 3rd row1. Pull the strap located at thebottom outboard of the seat back torelease the seat from the floor, androtate the seat up towards t

Locks and Security 163Keys 163Locks 165Anti-theft system 178Seating and Safety Restraints 184Seating 184Safety restraints 205Airbags 218Child restrain

AUDIO SYSTEMSQuick start — How to get goingWARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strongly

WARNING: To prevent possible damage to the seat or safetybelts, ensure that the safety belts are not buckled when movingthe seat to the load floor pos

Adjusting the 2nd row center 20% seat (if equipped)Lift the handle to move the seatforward or backward.Note: This seat can be moved forward to keep a

To operate the heated seats:• Push the indicated side of thecontrol for maximum heat.• Push again to deactivate.• Push the indicated side of thecontro

Folding down the 3rd row seats to the load floorWARNING: To prevent possible damage to the seat or safetybelts, ensure that the safety belts are not b

Third row power folding seat (if equipped)Note: Be sure that the headrestraints are folded down beforepowering the 3rd row seat down.The control butto

SAFETY RESTRAINTSPersonal Safety System姞The Personal Safety System威 provides an improved overall level offrontal crash protection to front seat occupa

Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ

Determining if the Personal Safety System姞 is operationalThe Personal Safety System威 uses a warning light in the instrumentcluster or a back-up tone t

WARNING: It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision, people riding inthese areas are more likely

• Front and rear seats2. To unfasten, push the release button and remove the tongue from thebuckle.• Front and rear seatsThe front outboard and rear s

Listening to satellite radio (if equipped)1. If the audio system is turned off,press VOL-PUSH to turn the radioon. Turn VOL-PUSH to adjust thevolume.N

Automatic locking modeIn this mode, the shoulder belt is pre-locked. The belt will still retract toremove any slack in the shoulder belt.The automatic

WARNING: After any vehicle collision, the combination lap andshoulder belt system at all passenger seating positions must bechecked by an authorized d

Safety belt height adjustmentYour vehicle has safety belt heightadjustments for the driver and rightfront passenger. Adjust the height ofthe shoulder

To adjust the comfort guide:1. Slip the shoulder belt into thebelt guide. (The portion of the beltbetween the latch tongue and theD-ring, not the port

Conditions of operationIf... Then...The driver safety belt is notbuckled before the ignitionswitch is turned to the onposition...The safety belt warni

If... Then...The driver’s safety belt is notbuckled approximately fiveseconds after the safety beltwarning light has turned off...The Belt-Minder威 fea

Reasons given... Consider...“Belts are uncomfortable” We design our safety belts to enhancecomfort. If you are uncomfortable -try different positions

WARNING: Do not sit on top of a buckled safety belt or insert alatchplate into the buckle to avoid the Belt-Minder威 chime. Todo so may adversely affec

4. Within approximately seven seconds of the light turning off, bucklethen unbuckle the safety belt.• This will disable the Belt-Minder威 feature for t

WARNING: All occupants of the vehicle, including the driver,should always properly wear their safety belts, even when an airbag supplemental restraint

For a single CD system, if a discis not already loaded, insert onlyone, label side up into the CD slot.LOADING CD and READING DISC will appear in the

WARNING: Additional equipment may affect the performance ofthe airbag sensors increasing the risk of injury.Children and airbagsChildren must always b

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

• one or more impact and safing sensors and diagnostic monitor (RCM),• a readiness light and tone• the electrical wiring which connects the components

WARNING: Do not attempt to service, repair, or modify theairbag SRS, its fuses or the seat cover on a seat containing anairbag. See your authorized de

The fact that the airbags did not inflate in a collision does not mean thatsomething is wrong with the system. Rather, it means the forces werenot of

WARNING: Do not attempt to service, repair, or modify theSafety Canopy威 system, its fuses, the A, B, C or D pillar trim, orthe headliner on a vehicle

• Two crash sensors mounted in the front doors (one on each side ofthe vehicle).• Two crash sensors located at the C pillar behind the rear doors (one

WARNING: If the SafetyCanopy威 system hasdeployed, the Safety Canopy威 willnot function again unless replaced.The Safety Canopy威 system(including the A,

The S.O.S. Post Crash Alert can be turned off when any one of thefollowing actions are taken by the driver or any other person:• pressing the hazard c

Recommendations for Safety Restraints for ChildrenChild size, height, weight, or ageRecommendedrestraint typeInfantsortoddlersChildren weighing 40 lb

While in folder mode, pressFOLDERto access the nextfolder on MP3 discs, if available.Press SHUFFLE to engage shufflemode. SHUFFLE ON will appear inthe

Recommendations for attaching child safety restraints for childrenRestraintTypeChildWeightUse any attachment method as indicatedbelow by “X”LATCH(lowe

WARNING: Never let a passenger hold a child on his or her lapwhile the vehicle is moving. The passenger cannot protect thechild from injury in a colli

If the child is the proper height, age, and weight (as specified by yourchild safety seat or booster manufacturer), fits the restraint and can berestr

When installing a child safety seat with combination lap/shoulder belts:• Use the correct safety belt buckle for that seating position.• Insert the be

3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructi

8. Remove remaining slack from thebelt. Force the seat down with extraweight, e.g., by pressing down orkneeling on the child restraint whilepulling up

however the safety belt can still be used to attach the child seat. Forforward-facing child seats, the top tether strap must also be attached tothe pr

Follow the instructions on attaching child safety seats with tether straps.Refer to Attaching child safety seats with tether straps later in thischapt

Some of the rear seats of your vehicle are equipped with built-in tetherstrap anchors located behind the seats as described below.In the third row cen

• Second row outboard seatingpositions• Second row center seatingposition (if equipped)3. Grasp the tether strap andposition it to the seat frame.4. R

AM/FM single CD/MP3 satellite compatible sound system(if equipped)WARNING: Driving while distracted can result in loss of vehiclecontrol, accident and

5. Rotate the tether strap clip.6. Tighten the child safety seat tether strap according to themanufacturer’s instructions.Third row center seating pos

3. Clip the tether strap through theanchor loop as shown.If the tether strap is clippedincorrectly, the child safety seat maynot be retained properly

Booster seats position a child so that vehicle lap/shoulder safety belts fitbetter. They lift the child up so that the lap belt rests low across the h

Types of booster seatsThere are generally two types of belt-positioning booster seats: backlessand high back. Always use booster seats in conjunction

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, a

Move a child to a different seating location if the shoulder belt does notstay positioned on the shoulder during use.Follow all instructions provided

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e

Power is supplied to all four wheels through a transfer case or powertransfer unit. 4WD vehicles allow you to select different drive modes asnecessary

• Narrower — to provide greatermaneuverability in tight spaces,particularly in off-road use.As a result of the above dimensionaldifferences, SUV’s and

TreadwearThe treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernmen

Satellite radio is available only with a valid SIRIUS radiosubscription. Check with your authorized dealer for availability.2.(Phone / mute): Press to

Glossary of tire terminology• Tire label: A label showing the OE (Original Equipment) tire sizes,recommended inflation pressure and the maximum weight

INFLATING YOUR TIRESSafe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air

The cold inflation pressure should never be set lower than therecommended pressure on the Safety Compliance Certification Label orTire Label.When weat

TIRE CAREInspecting your tiresPeriodically inspect the tire treads for uneven or excessive wear andremove objects such as stones, nails or glass that

WARNING: AgeTires degrade over time depending on many factors such asweather, storage conditions, and conditions of use (load, speed,inflation pressur

WARNING: Only use replacement tires and wheels that are thesame size, load index, speed rating and type (such as P-metricversus LT-metric or all-seaso

The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in aftermarket wheels.The use of whe

Tire and wheel alignmentA bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your

Note: If your tires show uneven wear ask an authorized dealer to checkfor and correct any wheel misalignment, tire imbalance or mechanicalproblem invo

4. R: Indicates a “radial” type tire.5. 15: Indicates the wheel or rim diameter in inches. If you change yourwheel size, you will have to purchase new

• DELETE ALL SONGS: Press OK to delete all song’s from thesystem’s memory. The display will read ARE YOU SURE ? Press OK toconfirm deletion of all sav

8. U.S. DOT Tire Identification Number (TIN): This begins with theletters “DOT” and indicates that the tire meets all federal standards. Thenext two n

13. Maximum Permissible Inflation Pressure: Indicates the tiremanufacturers’ maximum permissible pressure and/or the pressure atwhich the maximum load

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

TIRE PRESSURE MONITORING SYSTEM (TPMS)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pre

The Tire Pressure Monitoring System complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing tw

Understanding your Tire Pressure Monitoring System (TPMS)The Tire Pressure Monitoring System measures pressure in your fourroad tires and sends the ti

When you believe your system is not operating properlyThe main function of the Tire Pressure Monitoring System is to warn youwhen your tires need air.

Low TirePressureWarning LightPossiblecauseCustomer Action RequiredFlashing WarningLightSpare tire inuseYour temporary spare tire is inuse. Repair the

How temperature affects your tire pressureThe Tire Pressure Monitoring System (TPMS) monitors tire pressure ineach pneumatic tire. While driving in a

• Drive cautiously. If you hear the chains rub or bang against yourvehicle, stop and re-tighten the chains. If this does not work, removethe chains to

To view the station name or type: With RBDS ON, press TEXT/SCANto toggle between displaying the station type (COUNTRY, ROCK, etc.) orthe station name

Payload – is the combined weight of cargo and passengers that thevehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Lab

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S

WARNING: Exceeding the Safety Compliance Certification Labelvehicle weight rating limits could result in substandard vehiclehandling or performance, e

WARNING: Do not use replacement tires with lower loadcarrying capacities than the original tires because they maylower the vehicle’s GVWR and GAWR lim

• A final example for your vehicle with 1,400 lb. (635 kg) of cargo andluggage capacity. You and one of your friends decide to pick upcement from the

Follow these guidelines to ensure safe towing procedure:• Stay within your vehicle’s load limits. If exceeded, cargo should beremoved from the trailer

EngineRear axleratioMaximum GCWR -lb. (kg)Trailer weightrange (0 -maximum) lb. (kg)4x25.4L withstandardtrailer towpackageAll 11800 (5352) 0–6000 (0–27

EngineRear axleratioMaximum GCWR -lb. (kg)Trailer weightrange (0 -maximum) lb. (kg)Expedition EL (U.S. Only) Expedition Max (Canada Only) 4x25.4L with

Integrated hitch ratingThe standard integrated hitch has two ratings depending on mode ofoperation:• Weight carrying - requires a draw bar and hitch b

COMPRESS (Compression): Available only in CD/MP3 mode. PressMENU until COMPRESS ON/OFF appears in the display.Use/ / SEEK, SEEK to toggle ON/OFF. When

Weight distributing hitchWhen hooking up a trailer using a load equalizing hitch, always use thefollowing procedure:1. Park the unloaded vehicle on a

The braking system of the tow vehicle is rated for operation at theGVWR not GCWR.Trailer lampsTrailer lamps are required on most towed vehicles. Make

• Allow more distance for stopping with a trailer attached.• If you are driving down a long or steep hill, shift to a lower gear. Donot apply the brak

RECREATIONAL TOWINGFollow these guidelines if you have a need for recreational towing. Anexample of recreational towing would be towing your vehicle b

STARTINGPositions of the ignition1. Off— locks the steering wheel,automatic transmission gearshiftlever and allows key removal.2. Accessory— allows th

WARNING: If you smell exhaust fumes inside your vehicle, haveyour dealer inspect your vehicle immediately. Do not drive if yousmell exhaust fumes.Impo

4. Make sure the parking brake isset.5. Turn the key to 3 (on) withoutturning the key to 4 (start).Some warning lights will briefly illuminate. See Wa

Note: If the engine does not start on the first try, turn the key to the offposition, wait 10 seconds and try Step 2 again. If the engine still fails

WARNING: If you smell exhaust fumes inside your vehicle, haveyour dealer inspect your vehicle immediately. Do not drive if yousmell exhaust fumes.Impo

WARNING: To reduce the risk of electrical shock, do not useyour heater with ungrounded electrical systems or two-pronged(cheater) adapters.Prior to us

6. / OK(Play/Pause): Thiscontrol is operational in CD andDVD mode (if equipped). When aCD or DVD is playing in the FES system, press this control to p

How to use the engine block heaterEnsure the receptacle terminals are clean and dry prior to use. To cleanthem, use a dry cloth.Depending on the type

Anti-lock brake system (ABS)On ABS-equipped vehicles, a noise from the hydraulic pump motor andpulsation in the pedal may be observed during ABS braki

Parking brakeApply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops.Th

Pull the release lever to release thebrake. Driving with the parkingbrake on will cause the brakes towear out quickly and reduce fueleconomy.ADVANCETR

WARNING: If a failure has been detected within theAdvanceTrac威 with RSC威 system, the ⬙sliding car⬙ icon willilluminate steadily. Verify that the Advan

When AdvanceTrac威 with RSC威 performs a normal system self-check,some drivers may notice a slight movement of the brake, and/or arumble, grunting, or g

Electronic Stability Control (ESC)Electronic Stability Control (ESC) may enhance your vehicle’s directionalstability during adverse maneuvers, for exa

Switching Off AdvanceTrac威 with RSC威If the vehicle is stuck in snow, mud or sand, and seems to lose enginepower, switching off certain features of the

• Do not operate the vehicle with the power steering pump fluid levelbelow the MIN mark on the reservoir.• Some noise is normal during operation. If t

This system keeps the rear of your vehicle at a constant level byautomatically adding air or releasing air from the springs. If you exceedthe load lim

Customer Assistance 350Reporting safety defects (U.S. only) 356Reporting safety defects (Canada only) 357Cleaning 358Maintenance and Specifications 36

12. Memory presets: To set astation, select the desired frequencyband, AM, FM1 or FM2. Tune to thedesired station. Press and hold a preset button unti

WARNING: Vehicles with a higher center of gravity such asutility vehicles and trucks handle differently than vehicles with alower center of gravity. U

3. Remove the access plug on top ofthe steering column.4. Using a flat-head screwdriver orsimilar tool, move the brake-shiftinterlock actuator spindle

Brake-shift interlock – floor-shift transmissionThis vehicle is equipped with a brake-shift interlock feature that preventsthe gearshift lever from be

Driving with a 6–speed automatic transmissionThis vehicle is equipped with anAdaptive Transmission ShiftStrategy. The Adaptive TransmissionShift Strat

N (Neutral)With the gearshift lever in N (Neutral), the vehicle can be started and isfree to roll. Hold the brake pedal down while in this position.D

Tow/Haul delays upshifts to reduce frequency of transmission shifting.Tow/Haul also provides engine braking in all forward gears when thetransmission

If your vehicle gets stuck in mud or snowIf your vehicle gets stuck in mud or snow, it may be rocked out byshifting between forward and reverse gears,

The system will assist the driver in detecting certain objects while thevehicle moves in reverse at speeds less than 6 mph (10 km/h). Thesystem is not

Audible WarningsDistance to Object Warning5.7 feet (1.8 meters) to 9 feet(2.8 meters)Medium beep9 feet (2.8 meters) to 13 feet(4 meters)Medium/slow be

REVERSE CAMERA SYSTEM (IF EQUIPPED)The reverse camera system locatedon the liftgate provides a videoimage, which appears in the rearview mirror or on

15. ON/OFF/Volume: PressVOL-PUSH to turn ON/OFF. TurnVOL-PUSH to increase/decreasevolume.Note:If the volume is set above acertain level and the igniti

When towing, the reverse camera system will only see what is beingtowed behind the vehicle; this might not provide adequate coverage as itusually prov

Servicing• If the image comes on while the vehicle is not in R (Reverse), havethe system inspected by your authorized dealer.• If the image is not cle

Positions of the Control Trac systemThe Control Trac system functionsin four modes:• 2H (2WD) delivers power to therear wheels only. This isappropriat

WARNING: Utility and four-wheel drive vehicles are notdesigned for cornering at speeds as high as passenger cars anymore than low-slung sports cars ar

The AdvanceTrac威 with RSC stability enhancement system can be turnedoff manually by pressing the AdvanceTrac威 with RSC button (refer toAdvanceTrac威 wi

• It often may be less risky to strike small objects, such as highwayreflectors, with minor damage to your vehicle rather than attempt asudden return

Emergency maneuvers• In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle, i.e.,

Normal characteristicsOn some four–wheel drive models, the initial shift from two-wheel driveto four–wheel drive while the vehicle is moving can cause

If the transmission, transfer case, front axle or rear axle are submergedin water, their fluids should be checked and changed, if necessary.Driving th

Descend a hill in the same gear youwould use to climb up the hill toavoid excessive brake applicationand brake overheating. Do notdescend in neutral;

WARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strongly recommends thatdrivers use extreme caution

Maintenance and ModificationsThe suspension and steering systems on your vehicle have been designedand tested to provide predictable performance wheth

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

Canadian customers refer to your Customer Information Guidefor information on:• coverage period• exact fuel amounts• towing of your disabled vehicle•

FUEL PUMP SHUT-OFF SWITCHFUELRESETThe fuel pump shut-off switch is a device intended to stop the electricfuel pump when your vehicle has been involved

FUSES AND RELAYSFusesIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinth

Passenger compartment fuse panelThe fuse panel is located under the right-hand side of the instrumentpanel.To remove the trim panel for accessto the f

The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingProtected Circuits1 30A Smart window #12 15A Driver side memory module3 15A FES, Audio

Fuse/RelayLocationFuse AmpRatingProtected Circuits25 10A Demand lamps, Glovebox, Visor26 10A Instrument panel cluster27 20A Ignition switch28 5A Radio

Power distribution boxThe power distribution box is located in the engine compartment. Thepower distribution box contains high-current fuses that prot

Fuse/RelayLocationFuse AmpRatingProtected Circuits5 — Fuel pump relay6 — Trailer tow park lamp relay7 — Heated backlite/Mirror relay8 — Not used9 — Ru

CATEGORY ALL to seek all available SIRIUS categories and channels.Press OK to close and return to the main menu.• SAVE SONG: Press OK to save the curr

Fuse/RelayLocationFuse AmpRatingProtected Circuits36 30A** Power liftgate37 — Trailer tow left hand stop/turnrelay38 — Trailer tow right hand stop/tur

Fuse/RelayLocationFuse AmpRatingProtected Circuits64 30A** Moon roof65 20A** Auxiliary power point66 20A** Auxiliary power point67 40A** Climate contr

Have a flat serviced by an authorized dealer in order to prevent damage tothe TPMS sensors, refer to Tire pressure monitoring system (TPMS) inthe Tire

• Use more than one dissimilar spare tire at a time• Use commercial car washing equipment• Try to repair the dissimilar spare tireUse of one of the di

Stopping and securing the vehicle1. Park on a level surface, activatethe hazard flashers and set theparking brake.2. Place the gearshift in P (Park)an

Removing the spare tire1. Remove the jack handle andwinch extension from the tray andassemble them.2. Open the spare tire winch accessplug in the bott

WARNING: Do not attempt to change a tire on the side of thevehicle close to moving traffic. Pull far enough off the road toavoid the danger of being h

5. Position the jack according to thejack locator arrows found on theframe and turn the jack handle andextension tool assembly clockwise.Note: Use the

WARNING: Turn off the running boards (if equipped) beforejacking or placing any object under the vehicle. Never place yourhand between the extended ru

13. Turn on the air suspension system (if equipped). Refer to Messagecenter in the Driver Controls chapter for instructions on turning the airsuspensi

AUTOSET: In radio mode, press MENU until the display readsAUTOSET. Autoset allows you to set the strongest local radio stationswithout losing your ori

WHEEL LUG NUT TORQUE SPECIFICATIONSRetighten the lug nuts to the specified torque within 100 miles (160 km)after any wheel disturbance (tire rotation,

RUNNING OUT OF FUELIf you have run out of fuel and need to refill the vehicle with a portablefuel container, see Running out of fuel in the Maintenanc

1. Use only a 12–volt supply to start your vehicle.2. Do not disconnect the battery of the disabled vehicle as this coulddamage the vehicle’s electric

Note: In the illustrations, lightning bolts are used to designate theassisting (boosting) battery.2. Connect the other end of the positive (+) cable t

4. Make the final connection of the negative (-) cable to the jumpstarting stud located in the engine compartment, near the washer fluidbottle. Do not

Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the jump starting stud

2. Remove the jumper cable on the negative (-) connection of thebooster vehicle’s battery.3. Remove the jumper cable from the positive (+) terminal of

4. Remove the jumper cable from the positive (+) terminal of thedisabled vehicle’s battery.After the disabled vehicle has been started and the jumper

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

If the vehicle is towed by other means or incorrectly, vehicledamage may occur.Ford Motor Company produces a towing manual for all authorized towtruck

SPEEDVOL (Speed sensitive volume): Press MENU to reach theSPEEDVOL setting. Radio volume automatically gets louder withincreasing vehicle speed to com

GETTING THE SERVICES YOU NEEDWarranty repairs to your vehicle must be performed by an authorizedFord, Lincoln, or Mercury dealer. While any authorized

In Canada:Mailing Address (Ford vehicles)Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4Teleph

In the United States, a warranty dispute must be submitted to the BBBAUTO LINE before taking action under the Magnuson-Moss WarrantyAct, or to the ext

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.If a warranty con

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is

• After polishing chrome bumpers, apply a coating of MotorcraftPremium Liquid Wax (ZC-53-A), available from your authorized dealer,or an equivalent qu

5. Seek: In radio mode, press/ to access theprevious/next strong station.In CD mode, press/ toaccess the previous/next CD track.In satellite radio mod

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:• Take care when

WINDOWS AND WIPER BLADESThe windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, sub

• Be certain to wash or wipe your hands clean if you have been incontact with certain products such as insect repellent and suntanlotion in order to a

WARNING: Do not use cleaning solvents, bleach or dye on thevehicle’s safety belts, as these actions may weaken the beltwebbing.WARNING: On vehicles eq

LEATHER SEATS FOR THE KING RANCH EXPEDITION ONLY(IF EQUIPPED)Your vehicle is equipped with seating covered in premium, top-grainleather which is extre

ConditioningBottles of King Ranch Leather Conditioner are available at the KingRanch Saddle Shop. Visit the Web site at www.krsaddleshop.com,ortelepho

Motorcraft Detail Wash (ZC-3-A)Motorcraft Dusting Cloth (ZC-24)Motorcraft Engine Shampoo and Degreaser (U.S. only) (ZC-20)Motorcraft Engine Shampoo (C

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

Working with the engine on1. Set the parking brake and shift to P (Park).2. Block the wheels.WARNING: To reduce the risk of vehicle damage and/orperso

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT5.4L V81. Windshield washer fluid reservoir2. Engine oil dipstick3. Brake fluid reservoir4. Engine coo

8. FOLDER : In MP3 foldermode, press FOLDERto accessnext folder on MP3 discs, ifavailable.9.FOLDER: In MP3 foldermode, press FOLDER to accessthe previ

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

CHANGING THE WIPER BLADESIt is recommended that wiper blades are renewed before winter.To replace the wiper blades:1. Fold back the wiper arm andposit

4. To attach the new wiper to thewiper arm, align the cross pin andkeyway (denoted with the arrows)and firmly press the wiper bladeinto the wiper arm

• If the oil level is below thismark, engine oil must be addedto raise the level within thenormal operating range.• If required, add engine oil to the

Engine oil and filter recommendationsLook for this certificationtrademark.Use SAE 5W-20 engine oilOnly use oils “Certified For Gasoline Engines” by th

BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.If

WARNING: Keep batteries out of reach of children. Batteriescontain sulfuric acid. Avoid contact with skin, eyes or clothing.Shield your eyes when work

• If you do not allow the engine to relearn its idle trim, the idlequality of your vehicle may be adversely affected until the idletrim is eventually

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

• Add Motorcraft Premium Gold Engine Coolant or equivalentmeeting Ford specification WSS-M97B51-A1. Refer toMaintenance product specifications and cap

In TEXT MODE, sometimes the display requires additional text to bedisplayed. When the “>” indicator is active, press TEXT/SCAN and thenSEEKto view

Add the proper mixture of coolant and water to the cooling system byfollowing these steps:1. Before you begin, turn the engine off and let it cool.2.

Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Maintenance product specifications and capacities in

How fail-safe cooling worksIf the engine begins to overheat:• The engine coolant temperature gauge will move to the red (hot)area.• The engine coolant

FUEL FILTERFor fuel filter replacement, see your authorized dealer. Refer toscheduled maintenance information for the appropriate intervals forchangin

swallowed, call a physician immediately, even if no symptoms areimmediately apparent. The toxic effects of fuel may not be visible forhours.• Avoid in

Ethanol is more chemically active than gasoline. It corrodes some metalsand causes some plastic and rubber components to swell, break down orbecome br

Use the following guidelines to avoid electrostatic charge build-up whenfilling an ungrounded fuel container:• Place approved fuel container on the gr

WARNING: The fuel system may be under pressure. If you heara hissing sound near the fuel filler door (Easy Fuel™ “no cap”fuel system), do not refuel u

FFV engineYour vehicle is designed to use Fuel Ethanol (Ed75–Ed85),“Regular”unleaded gasoline or any mixture of the two fuels.Use of other fuels such

Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the rightf

Note: An MP3 disc with folders will show F001 (folder #) T001 (track #)in the display. An MP3 disc without folders will show T001 (track#) inthe displ

1. Locate the white plastic funnel. Itis attached to the underside of thespare tire cover or is included withthe tire changing tools.2. Slowly insert

The amount of usable fuel in the empty reserve varies and shouldnot be relied upon to increase driving range. When refueling yourvehicle after the fue

Driving style — good driving and fuel economy habitsGive consideration to the lists that follow and you may be able to changea number of variables and

• Carrying unnecessary weight may reduce fuel economy (as much as1 mpg [0.4 km/L] is lost for every 400 lb [180 kg] of weight carried).• Adding certai

If other than Ford, Motorcraft or Ford-authorized parts are used formaintenance replacements or for service of components affectingemission control, s

2. Poor fuel quality or water in the fuel—the engine may misfire or runpoorly.3. The fuel fill inlet may not have been properly closed. See Easy Fuel™

The OBD-II system is designed to check the emission control systemduring normal driving. A complete check may take several days. If thevehicle is not

BRAKE FLUIDThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the “MIN” and“

Changing the air filter element1. Locate the mass air flow sensorelectrical connector on the air outlettube. This connector will need to beunplugged.2

5. Release the three clamps thatsecure the cover to the air filterhousing. Push the air filter covertoward the center of the vehicle andup slightly to

CONGRATULATIONSCongratulations on acquiring your new Ford. Please take the time to getwell acquainted with your vehicle by reading this handbook. The

Your vehicle is equipped with anAuxiliary Input Jack (AIJ) locatedinside the center console. TheAuxiliary Input Jack provides a wayto connect your por

10. Reconnect the mass air flowsensor electrical connector to theoutlet tube. Make sure the lockingtab on the connector is in the“locked” position (co

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem Capacity Ford part nameFord part number /Ford specificationBrake fluidBetween MIN andMAX on rese

Item Capacity Ford part nameFord part number /Ford specificationEngine coolant (Baseradiator without auxrear heat)16.4 quarts(15.5L)Motorcraft Premium

Item Capacity Ford part nameFord part number /Ford specificationAutomatic transmissionfluid (6R80)11.0 quarts(10.5L)3MotorcraftMERCON威 LV ATF4XT-10-QL

Item Capacity Ford part nameFord part number /Ford specificationFuel tank(Expedition EL – U.S.only)33.5 gallons(126.8L)Fuel tank(Expedition Max –Canad

ENGINE DATAEngine 5.4L V8 engineCubic inches 330Fuel 87 octane or (E-85)Firing order 1-3-7-2-6-5-4-8Ignition system Coil on plugSpark plug gap 0.039–0

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

Peace of mindMobile-Ease™ hands-free communication systemRemote startVehicle security systemsWheel locksFor maximum vehicle performance, keep the foll

7. Adjust the sound on your portable music player until it reaches thelevel of the FM station or CD by switching back and forth between theAUX and FM

AABS (see Brakes) ...291Accessory delay ...115AdvanceTrac ...293Air cleaner filter .

Child safety seats - boosterseats ...242Cleaning your vehicleengine compartment ...360instrument pa

checking and adding ...372dipstick ...372filter, specifications ...374, 400recommendations ...

Illuminated visor mirror ...109Infant seats(see Safety seats) ...232Inspection/maintenance (I/M)testing ...

PParking brake ...292Parts (see Motorcraft parts) ...400Pedals (see Power adjustablefoot pedals) ...

Servicing your vehicle ...367Setting the clockAM/FM single CD ...26AM/FM/In-dash 6 CD ...33Snowplowing ...

Windshield washer fluid andwipers...107checking and adding fluid...370liftgate reservoir ...3

Your vehicle may be equipped with aUSB port inside your center console.This feature allows you to plug inmedia playing devices, memorysticks, and also

2. VOLUME: Press to increase or to decrease the volume levelin the headphones.From the rear seat controls, volume control can be set no higher thanthe

When the rear seat controls are activated, rear seat passengers can usethe controls to change the playing media for all passengers (Single Playmode) o

The front speakers remain playing for the front passengers. Press thespeaker button, or the 2/4 preset buttons simultaneously on the radioagain to dea

CD/CD player careDo:• Handle discs by their edges only.(Never touch the playingsurface).• Inspect discs before playing.• Clean only with an approved C

CDs with homemade paper(adhesive) labels should not beinserted into the CD player asthe label may peel and cause theCD to become jammed. It isrecommen

Sample MP3 structureIf you are burning your own MP3discs, it is important to understandhow the system will read thestructures you create. While variou

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freewayoverpasses, parking garages, dense tree foliage and thunderstorms caninterfere w

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

Radio Display Condition Action RequiredACQUIRING Radio requires morethan two seconds toproduce audio for theselected channel.No action required.This m

Radio Display Condition Action RequiredNO TEXT Song title informationnot available.Song title informationnot available at thistime on this channel.The

Your vehicle may be equipped with a Family Entertainment System(FES) which allows you to listen to audio CDs, MP3 discs, watch DVDsand to plug in and

Press the power button to turn thesystem off. The indicator light willturn off indicating the system is off.Note: The audio from the DVD system will p

3. The disc will begin to play andthe ‘MP3 Audio Disc’ screen willdisplay and allow you to access theCOMPRESSION, SHUFFLE, SCANand FOLDER MODE feature

from the auxiliary source, the screen will remain black. If the videosource is set to DVD-AUX, the display will automatically turn on if avideo signal

1. Press theheadphone/speaker/ buttonon the DVD player or press the 2and 4 memory presets on the radio at the same time.A green light will illuminate

To adjust display brightness:To decrease/increase the brightnesslevel on the display screen, pressthe brightness control on the DVDsystem. A display w

2. / (Stop/Eject): Pressonce to stop and press a secondtime to eject a disc from the DVDsystem.3.(Reverse): Press andrelease for the previous chapter

10. Volume: When in Single Play,press to increase () or decrease( ) the volume over all speakers.When in Dual Play, press to increase() or decrease (

PERCHLORATE MATERIALCertain components of this vehicle such as airbag modules, seat beltpretensioners, and button cell batteries may contain Perchlora

16. Cursor /Brightness controls:Use the cursor controls to makevarious selections when in anymenu. When not in a menu, and inDVD mode, press/ to adjus

1. Power control: Press to turn the FES (Family EntertainmentSystem) ON/OFF.2. Cursor controls: Use in various active menus to advance the cursorup/do

8. Fast Forward/Next: In DVD mode, press and hold for a quickadvance within the DVD. Press and release to advance to the nextchapter. In CD/MP3 mode,

Battery replacementBatteries are supplied with the remote control unit. Since all batterieshave a limited shelf life, replace them when the unit fails

HeadphonesWireless headphonesWARNING: The driver should never use the headphones whiledriving the vehicle. Using headphones may prevent the driverfrom

To install the batteries, remove the screw at the bottom of the cover.Then, lightly press down on top and slide the cover off.When replacing the batte

To operate the headphones:• Press POWER on the ear piece to turn on the headphones. A redindicator light will illuminate indicating the headphones are

Wired headphonesWARNING: Do not leave children unattended in the vehicle anddo not let children operate the system while unsupervised. Ifwired headpho

Single Play: Single play consists of all occupants in the vehicle listeningto the same playing media over the front and rear speakers. When theDVD sys

Press MEDIA to change the audiosource for Channel A. Thisinformation will display on the DVDsystem screen.Press the Headphone Control buttonB to chang

Service Data RecordingService data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This pote

Press MEDIA to change the audiosource for Channel A. Thisinformation will display on the DVDsystem screen.Press the Headphone Control buttonB to chang

Press MENU twice to access the DVD set-up menu and the followingfeatures:1. ZOOM2. ANGLE3. ASPECT RATIO4. LANGUAGE5. SUB TITLESAngle modeSelect ANGLE

You can select from: WIDE, LETTERBOX or PAN SCAN. Once you havemade your selection, press ENTERto confirm. The LCD screen displaywill immediately chan

Once you have made your selection,press ENTER to confirm. This isdisc dependent.Audio CDsTo play audio CDs on your DVD system:1. Ensure that the vehic

4. The folder, track and elapsedtime will appear in the status bar.The screen will list the Artist, Title,Album and File Name.COMP (Compression):Compr

CD, MP3 and CD player care• Handle discs by their edges only. Never touch the playing surface.• Do not expose discs to direct sunlight or heat sources

Playing a DVD1. Ensure that the vehicle is on or the ignition is in accessory mode.2. Ensure that the navigation system is on.3. Insert a DVD label-si

Frame by frame1. With a DVD playing, press pause.2. Press the right cursor button. TheDVD will advance one frame. Eachpress of the right cursor button

The B headphone jack (5) is locatedon the right side of the DVD system.Plug in wired headphones (notincluded) here.Note: The B headphones can onlyacce

There are three levels of control ofthe FES buttons. The states areFULL (enabled), LOCAL orLOCKED (disabled). To change the level of control, press th

Using your vehicle with a snowplowDo not use this vehicle for snowplowing.Your vehicle is not equipped with a snowplowing package.Notice to owners of

rights owners. Use of this copyright protection technology must beauthorized by Macrovision Corporation, and is intended for home andother limited vie

WARNING: The driver should not attempt to operate anyfunction of the DVD system while the vehicle is in motion. Givefull attention to driving and to t

Care and service of the DVD playerEnvironmental extremesDVD players which are subjected to harsh environmental conditions maybe damaged or perform at

Cleaning DVD and CD discsInspect all discs for contamination before playing. If necessary, cleandiscs only with an approved DVD and CD cleaner and wip

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Air flow sele

6. Fan speed adjustment: Controls the volume of air circulated in thevehicle.Manual heating and air conditioning system with rear passengercompartment

with the front control. The rear cabin airflow temperature will match thedriver airflow temperature setting when only the center rear temperaturelight

speed from the highest setting and put the vehicle’s transmission intothe P (Park) position to continue to receive cool air from your A/Csystem.• Do n

2. Rear temperature control: Press to enable the auxiliary system andset the desired rear cabin airflow temperature with the front control. Therear ca

12. Manual override controls: Allows you to manually select whereairflow is distributed. To return to full automatic control, press AUTO.13. FFront fa

Export unique (Non–United States/Canada) vehicle specificinformationFor your particular global region, your vehicle may be equipped withfeatures and o

Dual automatic temperature control with heated and cooled seatsand rear passenger compartment climate control (if equipped)1.Defrost: Distributes outs

5. R Rear fan speed control: Press to enable the auxiliary systemor to adjust the rear fan speed from the front control. Press to manuallyincrease or

14. Driver temperature control: Press to increase or decrease thetemperature on the driver side of the cabin. Sets the passenger sidetemperature also

• For maximum cooling performance, (MAX A/C):In AUTO: Press AUTO control and set to desired temperature.In Manual Override: Press the(panel), A/C, and

REAR WINDOW DEFROSTERRThe rear defroster control is locatedon the climate control panel andworks to clear the rear window offog and thin ice.The engin

HEADLAMP CONTROLRotate the headlamp control to thefirst positionto turn on theparking lamps.Rotate to the second positiontoturn on the headlamps.Rotat

Fog lamp control (if equipped)The headlamp control also operatesthe fog lamps. The fog lamps can beturned on when the headlampcontrol is in the, orpos

WARNING: Always remember to turn on your headlamps atdusk or during inclement weather. The Daytime Running Lamp(DRL) system does not activate the tail

1. Park the vehicle directly in front of a wall or screen on a level surface,approximately 25 feet (7.6 meters)away.• (1) 8 feet (2.4 meters)• (2) Cen

TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.INTERIOR LAMPSFront row map lamps (if equipp