Ford FCSD TECHNICAL TRAINING FCS-14000-DL Uživatelský manuál stáhnout pdf (Strana 88)

LESSON 3: POWERTRAIN

Transmission Control Module (TCM) and Main Control Valve Body

The Main Control assembly (7A100) referred to as the mechatronic unit is made up of the following components,

the TCM processor, seven control solenoids, and a typical main control assembly. The main control component

houses valves and springs within the two halves (upper and lower). The mechatronic unit is attached to the case

of the transmission and is accessible through the pan/filter assembly.

CAUTION: When removing the TCM/main control valve body assembly, it is important to first

remove the connection adaptor. This is accomplished by releasing the white locking mechanism and

pulling out on the adaptor. Failure to remove the adaptor before removing the TCM/main control

valve body assembly will result in damage to the adaptor or TCM/main control valve body assembly.

2005 Expedition/Navigator New Model Technician Training02-SEP-043-52

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 115 116

Žádné komentáře

Ford FCSD TECHNICAL TRAINING FCS-14000-DL Uživatelský manuál Strana 88