Ford 2013 Explorer v.3 Uživatelský manuál Strana 176

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 579
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 175
If the engine falls below 350 rpm while the cooled seats are on, the
feature will turn itself off and will need to be reactivated.
Note: When the heated/cooled front seat is active, you will be able to
hear the fan operating inside the seat. This is normal.
Heated and Cooled Seat Air Filter Replacement (If Equipped)
The climate controlled seat system includes air filters that must be
replaced periodically. See the scheduled maintenance information.
The filters are located under each front seat and can be accessed from
the 2nd row foot-well area. Move the front seats all the way forward and
to the full up positions to ease access.
To remove an air filter:
1. Turn the vehicle off.
2. Push up on the outside rigid edge
of the filter and rotate
counterclockwise once the tabs are
released, then remove the filter.
To install a filter:
1. First, position the filter in its
housing making sure that the far
forward end is all the way up in the
housing.
2. Push in on the center of the
outside edge of the filter and rotate
up into the housing until it clips
into position.
Seats 175
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)
Zobrazit stránku 175
1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 578 579

Komentáře k této Příručce

Žádné komentáře